We Are An Authorized GH Armor Systems Master Distributor &
Service The GH Armor Systems Ohio State Contract
We Have The Lowest Prices On The Entire Line Of GH Armor Systems Products. Guaranteed!
From Everyday Protection On Patrol To Full Out Tactical Gear, GH Armor Systems Have You Covered
GH Armor Catalog
ATTENTION STATE OF OHIO AGENCIES
GH Armor Systems Is Now Available
On The Ohio State Contract
Concealable Body Armor / Soft Armor Panels
Ethos
Features:
- Premium lightweight solution
- Maximum maneuverability
- Special threat tested
- Available in Levels II and IIIA
- Available in male, non-structured female and structured female designs
Models:
HeliX
Features:
- Versatile protection and flexibility
- Optimized for softness and comfort
- Special threat tested
- Available in Levels II & IIIA
- Available in male, non-structured female and structured female designs
Models:
ProX
Features:
- Protection with emphasis on value
- Special threat tested
- Available in Levels II & IIIA
- Available in male and non-structured female designs
Models:
TalonX
Features:
- Advanced protection against multiple threats (ballistic and spike)
- Available in Level II/2
- Available in male and non-structured female designs
Models:
Talon
Features:
- Protection against spike threats
- Extremely lightweight and flexible
- Available in Levels 1, 2, & 3
- Available in male and non-structured female designs
Models:
Carriers for Soft Panels
Concealable, external, and tactical designs accommodate soft armor panels, hard armor plates, and functional accessories.
Concealable Body Armor / Accessories
- Soft Trauma Plate (5X7″, 5×8”, 7×9”) – STP Spec Sheet
- Replacement strap kit for Low Profile Concealable Carrier
ID Patches & Name Tapes
- ID Patch in Standard Color or Reflective Color (2×6”, 3×7”, 3×8.5”, 3×9”, 3×10”, 4×10”, 4×11”)
- Name Tape in Standard Color or Reflective Color (1×4” & 1×5”)
- ID Patch and Name Tape Order Guide – ID Patch and Name Tape Order Guide
ATLAS Tactical Series
The Atlas AT9 Tactical Vest (Carrier Only) – Available in MOLLE, MOLLE FirstSpear Tubes®, Laser-Cut MOLLE, & Laser-Cut MOLLE FirstSpear Tubes®
ATLAS T9 Tactical Vest – Front (shown with accessories)
ATLAS T9 Tactical Vest – Rear (shown with accessories)
Standard Features:
- Available in all Level IIIA ballistic packages (sold separately)
- Available in Black, Dark Navy, Ranger Green, Coyote, Tactical Green, Wolf Grey, Tan
- Dual 1000/500 denier Cordura Nylon with urethane/water-repellant coating for durability.
- Front 3×9″ & 2×5″ loop for ID attachment (sold separately)
- Rear 3×10″ loop for ID attachment (sold separately)
- Bottom-loading 10×12 front & rear plate pockets with plate-leveling system.
- Fully adjustable shoulders with communication pass-through.
- Laser-Cut webbing for pouches & accessory attachment.
- Expandable rear drag strap for emergency extraction.
- Ballistic suspension for proper panel alignment.
Atlas AT9 accessories (sold separately) include:
- Soft armor carrier panels
- Soft armor cummerbund panels
- Soft armor shoulder panels
- Collar Protector
- Throat Protector
- Groin Protector
- Lower Back Protector
- Structured Bicep Protectors
- Structured Bicep Protectors with FirstSpear Tubes
Tactical Plate Harnesses
- Tactical plate harness with MOLLE attachment system
- Available in sizes 8×10″ or 10×12″
- Front and rear bottom-load plate pockets
- Adjustable low-profile buckle closure system
- Adjustable should straps with dual D rings for accessory attachment
- Extended hook and loop areas to accommodate a wide range of ID sizes (IDs sold separately)
- Rear drag strap for emergency extraction
- Optional carry bag
- Tactical plate harness with cummerbund closure
- Available in MOLLE or laser-cut MOLLE
- Available in sizes MD, LG, X-Large, and 2XL
- Front and rear internal bottom-load plate pockets accommodate 10×12″ rifle plates
- Cummerbund features drawstring girth adjustment system
- Front cummerbund closure available in dual-flap or single-flap systems
- Equipped with a low-profile buckle closure system as alternative to cummerbund closure
- Adjustable should straps with dual D rings for accessory attachment
- Rear drag strap for emergency extraction
- Optional carry bag
Tactical Carriers & Tactical First Responder Carriers
Description
- One-size-fits-all design with two carrier length options and three cummerbund length options.
- Available in Black, Coyote, Red, Dark Navy, Royal Blue, and Tan.
- Available in Ballistic, Spike, and Multi-Threat soft armor packages.
- Top-loading front and rear 10×12” plate pockets.
- 1000 denier Cordura nylon with urethane/water-repellent coating for durability.
- Front and rear 4×11″ loop for ID attachment (ID’s sold separately).
- Rear drag strap for emergency extraction.
- Padded shoulders for added comfort and weight distribution.
- Cummerbund is completely adjustable to fit a wider range of sizes (and accepts optional soft armor panels).
- Dual mic tabs below shoulders.
Tactical MOLLE Pouches
MOLLE pouches are available for equipment and accessory load carriage.
- Constructed of 1000 denier cordura nylon for durability.
- Each pouch is equipped with a metal drain grommet.
- All pouches are MOLLE compatible to allow modular attachment by reinforced universal straps.
- Available in Black, Ranger Green, Tactical Green, Coyote, Multi-Cam, Tan and Dark Navy
Available Pouches:
- Single Pistol Mag
- Double Pistol Mag
- Triple Pistol Mag
- Handcuff, Single
- Handcuff, Double
- #25 Distraction Device, Single
- Baton/Flashlight, Single
- Baton/Flashlight, Double
- Radio, Universal
- Radio, Bungee, Universal
- Grenade, Single
- Grenade, Double
- Utility, 8×8”
- Utility, 4×8”, Vertical
- Utility, 4×8”, Horizontal
- Shotgun, 12 Round
- Shotgun, 24 Round
- 37/40 MM Less Lethal, Single
- 37/40 MM Less Lethal, Double
- MK3/MK4 Aerosol
- M4 Mag, Double, Stacked
- M4 Mag, Single
- M4 Mag, Double
- M4 Mag, Triple
- Gas Mask
- Medical
- Tourniquet
- Hydration, 2.5L
- Side Plate, 6×6”
LEO H2 Special Threat Plate (GH-LEO-H2)
LEO H2 Handgun
The LEO H2 special threat plate provides handgun protection & features a multi-hit configuration. Also provides protection against blunt force trauma. Constructed of polyethylene and features a diamond rip-stop nylon cover. Available in 5×7”, 5×8”, 7×9”, 8×10″, 10×12” Full Cut or 8×10″ & 10×12” Shooter’s Cut.
LEO-H2 Spec SheetLEO R3 Rifle ICW
The LEO R3 ICW special threat plate provides rifle protection when in conjunction with following ballistic models: Ethos IIIA EX02, Ethos II EX02, HeliX IIIA HX04, HeliX IIIA HX03, HeliX II HX02, and LiteX IIIA LX02. This lightweight plate also provides protection against blunt force trauma. Constructed of polyethylene and covered in cordura. Available in 5×8”, 6×6″, 7×9”, 8×10” Full Cut and 8×10″ & 10×12” Shooter’s Cut.
LEO-R3 Spec Sheet
LEO R3 ICW Special Threat Plate (GH-LEO-R3)
Rifle Plates (Level III & Level IV)
Rifle plates are available in a variety of shapes & sizes to enhance ballistic protection. Plates vary in weight based on size & thickness, as well as composition & cover material.
K-9 Carrier
Description:
- Available in Level II and Level IIIA ballistic packages (sold separately)
- Available in Black, Ranger Green, Coyote
- 2-piece carrier design features six buckle closure straps for secure fit
- Restraint handle and Two 1″ D rings for adjustable leash attachment
- Detachable spine extender provides 2″ ballistic overlap.
Level IIIA ACH Ballistic Helmet
Ballistic helmets are tested to NIJ Standard-0106.01 for Level IIIA protection against projectiles and blunt force trauma. Made of advance composite materials with adjustable multi-point harness. HB2-ACH Helmet Spec Sheet
- Styles: ACH Full-Cut, ACH Mid-Cut, ACH High-Cut
- Colors: Black, Coyote, Khaki, Tactical Green, Foliage Green
- Sizes: Small, Medium, Large, X-Large, Jumbo
Optional Accessories:
- Ratchet Retention System
- Nape Curtain
- Rail Set
- NVG 3-Hole Shroud
- Velcro Kit
- Standard Carry Bag (holds helmet only)
- Deluxe Carry Bag (holds helmet and face shield)
- Helmet Cover
- Ballistic Face Shield
- Riot (Non-ballistic) Face Shield
Ballistic Shields
SHB4 Ballistic Shield
- Level IIIA for handgun protection. Tested to NIJ Standard-0108.01.
- Made of lightweight composite materials.
- Available Sizes: 18×30″, 20×34″, 24×36″ & 24×48″ Full Cut or 24×36″ Weapons Cut.
- Features include: 7×10″ Viewport, forearm pad, horizontal or tri-grip handle, dual rake bars and both Sheriff and POLICE IDs.
- Optional Accessories: 1200 Lumen LED integrated light; 1000 or 600 Lumen LED non-integrated light; Carry bag; Shoulder strap.
- SHB4 Ballistic Shield Spec Sheet
SHB4 Ballistic Shield Full Cut
SHB4 Ballistic Shield Weapons Cut
SHB5 Ballistic Shield 20×36″ and 16×30″ Strike Face
SHB5 Ballistic Shield Body Side
SHB5 Ballistic Shield
- Level III. NIJ Standard-0108.01 compliant.
- Made of lightweight composite materials.
- Available Sizes: 16×30″ or 20×36″ Full Cut.
- Features include: 5×7″ viewport & integrated horizontal handle with forearm pad.
- Optional accessories: LED 1200 Lumen light; Carry bag; Shoulder strap.
- SHB5 Ballistic Shield Spec Sheet
SHB6 Ballistic Shield
- Level III. NIJ Standard-0108.01 compliant.
- Made of lightweight polyethylene.
- Available Sizes: 16×30″ or 20×36″.
- Features include: 5×7″ Viewport, forearm pad, forearm strap, horizontal or tri-grip handle.
- Optional accessories: LED 1200 Lumen light & Carry bag.
- SHB6 Ballistic Shield Spec Sheet
SHB6 Ballistic Shield Strike Face
SHB6 Ballistic Shield Body Side